Montero Sport LS 2WD V6-3.0L SOHC (1998)
CAUTION: Do not reuse the warped molding.
Use special tool MB990449 to lever out the molding.
[DOOR]MOLDING REMOVAL
1. Attach protection tape all the way along the edges of the double-sided tape which is still adhering to the body.
2. Use a resin spatula to scrape off the double-sided tape.
3. Peel off the protection tape.
4. Wipe the body surface and clean it with a shop towel moistened with 3M(TM) AAD Part number 8880 or equivalent.
INSTALLATION SERVICE POINTS
]A[DOOR MOLDING INSTALLATION
Double-sided tape affixing to the door molding (When reusing)
1. Scrape off the double-sided tape with a resin spatula or gasket scraper.