Montero Sport LS 2WD V6-3.0L SOHC (1998)
5. Do not attempt to repair the wiring harness connectors of the SRS. If any of the connectors are diagnosed as faulty, replace the wiring harness. If
the wires are diagnosed as faulty, replace or repair the wiring harness according to the table.
6. SRS components should not be subjected to heat over 93 °C (200 °F), so remove the SRS-ECU, air bag module and clock spring before drying or
baking the vehicle after painting.
7. After servicing the SRS system, check warning light operation to make sure that the system functions properly
8. Make certain that the ignition switch is OFF when the scan tool is connected or disconnected.
9. If you have any questions about the SRS, please contact the MMSA tech Line.
WARNING: SERIOUS INJURY CAN RESULT FROM UNINTENDED AIR BAG DEPLOYMENT, SO USE ONLY THE PROCEDURES
AND EQUIPMENT SPECIFIED.
