Montero Sport LS 2WD V6-3.0L SOHC (1998)
>A< Piston Cup / Piston Reassembly.
Required Special Tool:
MB990623: Installer
1. Use alcohol or specified brake fluid DOT 3 or DOT4 to clean the wheel cylinder and the piston.
2. Apply the specified brake fluid DOT 3 or DOT 4 to the piston cups and special tool MB990623.
CAUTION: In order to keep the piston cup from becoming twisted or slanted, slide the piston cup down the tool MB990623 slowly and
carefully, without stopping.
3. Set the piston cup on special tool MB990623 with the lip of the cup facing up, fit the cup onto the special tool MB990623, and then slide it
down the outside of the tool MB990623 into the piston groove.