Montero Sport LS 2WD V6-3.0L SOHC (1998)
>A< Crankshaft Rear Oil Seal Installation.
Required Special Tool:
MD998718: Crankshaft Rear Oil Seal Installer
1. Apply a small amount of engine oil to the entire circumference of the oil seal lip.
2. Use special tool MD998718 to tap in the oil seal as shown in the illustration.
>B< Flywheel Bolt <M/T>/drive Plate Bolt <A/T> Installation.
Required Special Tool:
MD998781: Flywheel Stopper
Use special tool MD998781 in the same way as during removal to install the camshaft sprocket.
Post-installation Operation:
-
Transmission and Transfer Assembly Installation.
