Montero Sport LS 2WD V6-3.0L SOHC (1998)
9. Wait for at least five minutes, and then check that the auto-tensioner pushrod extends within the standard value.
Standard value (A): 3.8 - 5.0 mm (0.15 - 0.20 inch)
10. If no, repeat the operation in steps (5) to (9) above.
11. Check again that the timing marks of each sprocket are aligned.
>C< Crankshaft Pulley Installation.
Required Special Tools:
MD998715: Crankshaft Pulley Holder Pin
MB990767: End Yoke Holder
Use special tools MD998715 and MB990767 to install the crankshaft pulley.
INSPECTION
Auto-tensioner
-
Check the auto-tensioner for possible leaks.
-
Check the pushrod for cracks.
