mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Customer Safety Information|Page 6582 > < Instrument Panel, Gauges and Warning Indicators|Testing and Inspection
Page 1
background image

Air Bag(s) Arming and Disarming: Customer Safety Information

SRS Maintenance

The SRS must be inspected by an authorized dealer up to 10 years after the date of vehicle registration.

Warning/Caution Labels

Warning, Caution Label Locations

A number of caution labels related to the SRS are found in the vehicle, as shown in the following illustration. Follow label instructions when servicing
SRS. The label L is not to be removed except by owner. If the other labels are dirty or damaged, replace them.

A.

CAUTION: SRS
Before replacing steering wheel, refer to center front wheels, and align SRS clock spring neutral marks.
Failure to do so may render SRS system inoperative, risking serious driver injury.

B.

WARNING: SRS
This air bag module cannot be repaired. Do not disassemble or tamper.
Do not perform diagnosis. Do not touch with electrical test equipment or probes. Refer to special handling, storage, and disposal procedures.
Tampering or mishandling can result in injury.

C.

DANGER POISONOUS FLAMMABLE MATERIAL
To prevent personal injury, do not dismantle, incinerate, or bring into contact with electricity store below 200°F (93°C).

D.

CAUTION: SRS clock spring
This is not a repairable part. Do not disassemble or tamper. If defective, replace entire unit as per service instructions. To re-center: rotate
clockwise until tight. Then rotate in opposite direction approximately 3 4/5 turns and align arrows.

Customer Safety Information|Page 6582 > < Instrument Panel, Gauges and Warning Indicators|Testing and Inspection