mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Maintenance Required Lamp/Indicator > < Diagram Information and Instructions|Page 6637
Page 1
background image

Low Fuel Lamp/Indicator: Testing and Inspection

LOW FUEL INDICATOR SENSOR CHECK

CAUTION:After finishing this test, wipe the unit dry and install it in the fuel tank.

1. Connect the fuel gauge unit (thermistor) to battery via test light (12 V - 3.4 W). Immerse in water.
2. Condition is good if the light goes off when the thermistor is immersed in water and goes on when it is taken out of water.
3. If all checks are correct, the fuel gauge unit is OK. If any check is not correct, replace the fuel gauge unit.

Maintenance Required Lamp/Indicator > < Diagram Information and Instructions|Page 6637