Montero Sport LS 2WD V6-3.0L SOHC (1998)
>A< O-Ring Installation.
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring Insert the O-ring to the water pipe, and coat the outer portion of the
O-ring with water or engine coolant.
>B< Water Hose Connection.
To reuse the water hose, align the mating marks that were made during removal, and then install the hose clamp.
>C< Gasket Installation.
Bend over the tabs to secure the gasket to the water passage assembly.
>D< Radiator Upper Hose Connection.
1. Insert each hose as far as the projection of the water outlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
Post-installation Operation:
-
Engine Coolant Draining.
-
Front Exhaust Pipe and Heat Protector Installation.
-
Shift Cable Bracket.
-
Intake Manifold Installation
-
Thermostat Installation
INSPECTION
Water Pipe And Hose Check
Check the water pipe and hose for cracks, damage and clogs. Replace them if necessary.
