mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

A/C - Pulsating/Rattle Noise|Page 892 > < Coolant Line/Hose|Service and Repair|Page 883
Page 1
background image

Hose/Line HVAC: All Technical Service Bulletins
A/C - Pulsating/Rattle Noise

No.: TSB-03-55-001

DATE: January, 2003 

MODEL: 1997-02 Montero Sport

SUBJECT:
A/C PULSATING / RATTLE NOISE

PURPOSE

A pulsating or rattle noise may be heard when the A/C is on. This bulletin describes how to eliminate the noise.

On 1997-2000 models built before 6/00, a rattle noise may be heard when the A/C is on, due to the A/C discharge hose bracket vibrating at the engine
block. To eliminate this noise, remove the A/C discharge hose bracket as described in Step 1 of this bulletin.

On 1998-2001 models built after 12/97, a pulsating noise may be heard when the A/C is on, due to A/C compressor bracket vibration. To eliminate this
noise, install the cast-iron A/C compressor bracket listed in this bulletin. This bracket has an extra mounting location to help reduce vibration. Follow the
procedure in Step 2 of this bulletin.

On 2000-2002 models, a new, improved A/C discharge hose is available to eliminate the noise. Go to Step 3 of this bulletin.

AFFECTED VEHICLES
1997-2002 Montero Sport models produced before 12/10/01

PROCEDURE

1.

Vehicles Built Before 6/00:

To eliminate a rattle noise when the A/C is on, remove the A/C discharge hose bracket.

a.

After removing the bracket, be sure that the A/C discharge hose does not contact any surrounding parts.

b.

Be sure that the A/C discharge hose does not contact the hole in the headlamp support panel.

2.

1998-2001 Models Built After 12/97:

A/C - Pulsating/Rattle Noise|Page 892 > < Coolant Line/Hose|Service and Repair|Page 883