Montero Sport LS 2WD V6-3.0L SOHC (1998)
(1) Measure voltage between terminal 16 and ground.
-
Voltage should be approximately 12 volts (battery positive voltage).
(2) If within specifications, go to Step 2.
(3) If not within specifications, check the intermediate connectors A-54X, D-O1 and D-06, and repair or replace if needed.
(4) If the intermediate connectors A-54X, D-O1 and D-06 are in good condition, repair the harness wire between the data link connector C-69 and
fusible link (6).
(5) Then confirm that the malfunction symptom is eliminated.
STEP 2. Check the ground line at the data link connector C-69.
(1) Check for the continuity between terminal 4, 5 and ground.
-
There should be continuity (0 ohms).