mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

SRS - Diagnostic Trouble Code (DTC) Erasure|Page 202 > < Component Tests and General Diagnostics|Page 196
Page 1
background image

Air Bag Control Module: Technical Service Bulletins
SRS - Diagnostic Trouble Code (DTC) Erasure

No.: TSB-95-52B-002 

DATE: November, 1995 

MODEL: All models with SRS

DIAGNOSTIC TROUBLE CODE (DTC) ERASURE

VEHICLES AFFECTED
All models equipped with Supplemental Restraint System (SRS)

BACKGROUND INFORMATION

DTCs set in the SRS diagnosis unit remain in memory until they are erased with the MUT-II scan tool. It is important for all SRS DTCs to be erased
after troubleshooting and repairs. In the event of an accident involving air bag deployment, only the DTCs pertaining to the accident should be in the
SRS diagnosis unit memory.

Disconnecting the battery cables will not erase SRS DTCs.

After completing SRS troubleshooting and repairs as described in section 52B of the appropriate service manual, erase all SRS DTCs with the MUT-II
scan tool.

WARRANTY INFORMATION

Use standard warranty procedures. Diagnosis time is included in component replacement time in the MMSA Labor Operation Time Schedule.

SRS - Diagnostic Trouble Code (DTC) Erasure|Page 202 > < Component Tests and General Diagnostics|Page 196