Montero Sport LS 2WD V6-3.0L SOHC (1998)
Impact Sensor: Testing and Inspection
WARNING: If a dent, crack, deformation or rust is detected, replace with a new sensor.
1. Check the front impact sensor for dents, cracks, deformation or rust.
WARNING: Always replace the sensor with a new one if the resistance is not within the standard value.
2. Measure the resistance between the terminals and check whether it is within the standard value.
Standard value: 2,000 ± 40 Ohms
3. Check the fender shield panel for deformation or rust.
4. Check the continuity between the terminal and bracket. If there is a continuity, the insulation is damaged. Replace the sensor with a new one.
