mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Procedures|Page 5677 > < Procedures
Page 1
background image

Impact Sensor: Removal and Replacement

Front Impact Sensor

WARNING:
- Never repair or disassemble the front impact sensor. If faulty, replace it.
- Handle the font impact sensors very carefully, taking care not to drop them or otherwise subject them to impact. If a sensor is dented,

cracked, deformed or rusted, replace it with a new one.

- Replace the sensors with new ones after the air bag has deployed.

Pre-removal Operation

Turn the ignition key to the 'OFF' position.

Removal

1. Negative (-) Battery Cable Disconnection

WARNING:  Wait at least 60 seconds after disconnecting the battery cable before doing any further work.

Procedures|Page 5677 > < Procedures