Montero Sport LS 2WD V6-3.0L SOHC (1998)
SPEED-REDUCTION SETTING
1. Set to the desired speed.
2. Push the auto-cruise control switch in the direction of arrow (B).
3. Check to be sure that deceleration continues while the switch is pressed, and that after it is released the constant speed at the time when it was
released becomes the driving speed.
NOTE: When the vehicle speed reaches the low limit [approximately 40 kph (25 mph)] during deceleration, the auto-cruise control will be
cancelled.
RETURN TO THE SET SPEED BEFORE CANCELLATION AND AUTO-CRUISE CONTROL CANCELLATION
1. Set the auto-cruise speed control.
2. When any of the following operations are performed while at constant speed during auto-cruise control, check if normal driving is resumed and
deceleration occurs.
1. The auto-cruise control switch is pushed in the direction of arrow (C).
2. The brake pedal is depressed.
3. The clutch pedal is depressed. (M/T)
4. The selector lever is moved to the "N" range. (A/T)
3. At a vehicle speed of 40 kph (25 mph) or higher, check if when the "RESUME" switch is switched "ON," the vehicle speed returns to the speed
before auto-cruise control driving was cancelled, and constant speed driving occurs.
4. When the main switch is turned to "OFF" while driving at constant speed, check if normal driving is resumed and deceleration occurs.
