Montero Sport LS 2WD V6-3.0L SOHC (1998)
STEP 4. Check harness connector D-16 at the key reminder switch for damage.
If harness connector D-16 is damaged, repair or replace it. Check that the malfunction is eliminated.
If harness connector D-16 is in good condition, go to Step 5.
STEP 5. Check the harness wires between key reminder switch connector D-16 and body ground.
If the harness wires between key reminder switch connector D-16 and body ground are damaged, repair them. Go to Step 6.
If the harness wires are in good condition, replace the ETACS-ECU or tone alarm-ECU. Check that the malfunction is eliminated.
STEP 6. Check the harness wires between key reminder switch connector D-16 and ETACS-ECU connector D-11 or tone alarm-ECU or D-12.
If the harness wires between key reminder switch connector D-16 and ETACS-ECU connector D-11 or tone alarm-ECU connector D-12 are damaged,
repair them. Check that the malfunction is eliminated.
If the harness wires are in good condition, replace the ETACS-ECU or tone alarm-ECU. Check that the malfunction is eliminated.
NOTE: After inspecting junction block connector D-13, inspect the wire. if junction block connector 13 is damaged, repair or replace it.
Procedure 5 Ignition Key Reminder Tone Alarm Does Not Sound
