mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Power Steering Line/Hose > < Bleeding System
Page 1
background image

Power Steering Fluid: Service and Repair
Fluid Replacement

1. Raise the front wheels on a jack, and then support them with rigid racks.
2. Disconnect the return hose connection.
3. Connect a vinyl hose to the return hose, and drain the oil into a container.

CAUTION:  Be careful not to position the high-tension cable near the fuel rail.

4. Disconnect the high-tension cable.
5. While operating the starting motor intermittently, turn the steering wheel all the way to the left and right several times to drain all of the fluid.
6. Connect the return hoses securely, and then secure it with the clip.
7. Fill the oil reservoir with the specified fluid up to the lower position of the filler, and then bleed the air.

Specified fluid: Automatic transmission fluid DEXRON II

Power Steering Line/Hose > < Bleeding System