Montero Sport LS 2WD V6-3.0L SOHC (1998)
>B< O-Rings Installation (9, 11, 15, 23 & 26)
Apply specified automatic transmission fluid to the O-rings and install them.
>C< Spring Installation (16)
Fit the spring to the oil pump body with the larger-diameter end at the terminal assembly side.
>D< Side Plate Installation (8)
Line up the dowel pin hole of the side plate with the dowel pin of the pump body when installing the side plate.
>E< Rotor Installation (6)
Install the rotor to the pulley assembly so that the rotor's punch mark is at the pump cover side.
>F< Snap Ring Installation (5)