Montero Sport LS 2WD V6-3.0L SOHC (1998)
After installation of the snap ring, lift the rotor and check that the snap ring has entered the countersunk part.
>G< Cam Ring Installation (4)
Install the cam ring with the punch mark facing the side plate.
>H< Vane Installation (3).
Install the vanes on the rotor, paying close attention to the installation direction.
INSPECTION
-
Check the flow control valve for clogging.
-
Check the pulley assembly for wear or damage.
-
Check the rotor and vane groove for "stepped" wear.
-
Check the contact surface of cam ring and vanes for "stepped" wear.
-
Check the vanes for damage.
