Montero Sport LS 2WD V6-3.0L SOHC (1998)
Required Special Tools:
MB990786: Rear Axle Bearing Cuter Race Bridge
MB990801: Rear Axle Bearing Outer Race Remover
Install special tools MB990786 and MB990801 as shown. Turn the center bolt clockwise to force the bearing outer race out.
<Vehicles With ABS>
Required Special Tool: MB990799: Bearing Inner Race Installer
Reinstall the outer bearing inner race that was removed previously. Use special tool MB990799 and a press to remove the bearing outer race.
Assembly Service Points
>A< Bearing Outer Race Installation
<Vehicles Without ABS>
Required Special Tools:
MB990937: Installation Adapter
MB990938: Bar
Use special tools MB990937, MB990938 to press-fit the bearing outer race to the bearing case.
<Vehicles With ABS>
