Montero Sport LS 2WD V6-3.0L SOHC (1998)
Transmission Position Switch/Sensor: Adjustments
PARK/NEUTRAL POSITION SWITCH AND CONTROL CABLE ADJUSTMENT
1. Move the selector lever to the "N" position.
2. Loosen the adjusting nut of the control cable.
3. Gently pull the end of the transmission control cable in the direction of the arrow and tighten the adjusting nut to the specified torque.
Tightening torque: 24 Nm (18 ft. lbs.)
4. Check that the selector lever is in the "N" position.
5. Check that each range on the transmission side operates and functions correctly for each position of the selector lever.
