Montero Sport LS 4WD V6-3.0L SOHC (1999)
WARNING: Ensure that the clock spring's mating marks are properly aligned. If not, the steering wheel may not rotate completely during a turn, or the
flat cable in the clock spring could be damaged. This would prevent normal SRS operation and possibly cause serious injury to the driver.
Align the mating marks of the clock spring. Turn the front wheels to the straight-ahead position. Then install the clock spring to the column switch.
Mating Mark Alignment
Turn the clock spring clockwise fully. Then turn it back approximately 3 4/5 turns counterclockwise to align the mating marks.
Post-Installation Inspection
1. Reconnect the negative (-) battery cable.
2. Turn the ignition key to the "ON" position.
3. Does the "SRS" warning light illuminate for approximately 7 seconds, and then remain off for at least 5 seconds after turning "OFF?"
4. If yes, the SRS system is functioning properly. If no, consult SRS Diagnosis.
