Montero Sport LS 4WD V6-3.0L SOHC (1999)
Steering Wheel: Testing and Inspection
1. With the engine running (hydraulic operation), set the front wheels straight ahead.
2. Measure the play on the steering wheel circumference before the wheels start to move when slightly moving the steering wheel in both directions.
Limit: 50 mm (2.0 inches)
3. When the play exceeds the limit, check for the play on the steering shaft and steering linkage connection. Correct or replace.
4. If the free play still exceeds the limit value, set the steering wheel straight ahead with the engine stopped. Load 5 Nm (1.1 lbs.) towards the
steering wheel circumference and check the play.
Standard value (steering wheel play with the engine stopped): 10 mm (0.4 inch) or less
If the play exceeds the standard value, check the steering gear backlash and ball joint end play.
