mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Heater Core|Removal and Installation|Page 4661 > < Thermistor Temperature Sensor <--> [Evaporator Temperature Sensor / Switch]|Specifications|Page 4656
Page 1
background image

Heater Core: Service and Repair
Removal and Installation

Heater Unit And Heater Core

HEATER UNIT AND HEATER CORE REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT
<A> SUCTION PIPE OR HOSE, DISCHARGE PIPE DISCONNECTION

CAUTION:  Seal the hoses completely, otherwise the compressor oil and receiver will absorb water vapor easily, possibly damaging the compressor and
deteriorating performance. Plug the disconnected hose and the evaporator nipple to prevent foreign material from getting into them.

INSTALLATION SERVICE POINT
>A< EVAPORATOR INSTALLATION

When replacing the evaporator, refill with a specified amount of compressor oil and install it (to the vehicle).

Compressor oil: SUN PAG 56

Heater Core|Removal and Installation|Page 4661 > < Thermistor Temperature Sensor <--> [Evaporator Temperature Sensor / Switch]|Specifications|Page 4656