Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Camshaft Position Sensor: Testing and Inspection
Required Special Tools:
MB991348: Test Harness
MD998478: Test Harness
Measurement Method
1. Disconnect the camshaft position sensor connector, and connect the test harness special tool (MB991348) in between. (All terminals should be
connected.)
2. Connect the analyzer special patterns pickup to camshaft position sensor connector terminal 2.
3. Disconnect the crankshaft position sensor connector, and connect the test harness special tool (MD998478) in between.
4. Connect the analyzer special patterns pickup to crankshaft position sensor connector terminal 2 (black clip of special tool).
Alternate method (Test harness not available)
1. Connect the analyzer special patterns pickup to PCM terminal 56. (Check the camshaft position sensor signal wave pattern.)
2. Connect the analyzer special patterns pickup to PCM terminal 45. (Check the camshaft position sensor signal wave pattern.)
Standard Wave Pattern
Observation conditions
Standard Wave Pattern
