Montero Sport LTD 2WD V6-3.5L SOHC (2000)
>A< INJECTOR/FUEL PRESSURE REGULATOR/HIGH-PRESSURE FUEL HOSE INSTALLATION
CAUTION: Do not let the engine oil get into the fuel rail. Or the injectors will be damaged.
1. Apply a drop of new engine oil to the O-ring.
2. Turn the injector. To the right and left to install to the fuel rail. Repeat for fuel pressure regulator and high-pressure fuel hose.
Be careful not to damage the O-ring. After installing, check that the item turns smoothly.
3. If it does not turn smoothly, the O-ring may be trapped, remove the item, re-install it into the fuel rail and check again.
4. Tighten the high-pressure fuel hose and fuel pressure regulator to the specified torque.
Tightening torque:
8.8 N.m (78 in-lb) <Fuel pressure regulator>
4.9 N.m (43 in-lb) <High-pressure fuel hose>