Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Clockspring Assembly / Spiral Cable: Service and Repair
WARNING:
1. Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
2. Do not drop the air bag modules or clock spring or allow contact with water, grease or oil
Replace it if a dent, crack, deformation or rust is detected.
3. The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top
of it.
4. Do not expose the air bag modules to temperatures over 93° C (200° F).
5. After deployment of an air bag, replace the air bag modules. Check the clock spring, and if faulty, replace it with a new part.
6. Wear gloves and safety glasses when handling air bags that have already deployed.
7. An undeployed air bag module should only be disposed of in accordance with the procedures.
Pre-removal Operation
After setting the steering wheel and front wheels to the straight ahead position, remove the ignition key.
Required Special Tools:
MB990803: Steering Wheel Pullar
MB991502: Scan Tool (MUT-II)
MB991613: SRS Check Harness
REMOVAL SERVICE POINTS