mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Front Impact Sensor|Page 4886 > < Electrical Specifications|Page 4883
Page 1
background image

Impact Sensor: Service and Repair
Front Impact Sensor

WARNING:

1. Never repair or disassemble the front impact sensor. If faulty, replace it.
2. Handle the front impact sensors very carefully, taking care not to drop them or otherwise subject them to impact. It a sensor is dented,

cracked, deformed or rusted, replace it with a new one.

3. Replace the sensors with new ones after the air bag has deployed.

Pre-removal Operation

Turn the ignition key to the "OFF" position.

REMOVAL SERVICE POINT

<A> NEGATIVE (-) BATTERY CABLE DISCONNECTION

DANGER:  Wait at least 60 seconds after disconnecting the battery cable before doing any further work. 

Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and deployment.

Front Impact Sensor|Page 4886 > < Electrical Specifications|Page 4883