mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 599 > < Symptom Related Diagnostic Procedures|Page 597
Page 17
background image

4. Check that the tone alarm stops sounding when terminal number 6 is grounded.
If the tone alarm stops sounding, go to Step 4.

If the tone alarm does not stop sounding, go to Step 5.

STEP 4. Check harness connector D-16 at the key reminder switch for damage.

If harness connector D-16 is damaged, repair or replace it. Refer to Harness Connector Inspection. Check that the malfunction is eliminated.

If harness connector D-16 is in good condition, go to Step 5.

STEP 5. Check the harness wires between key reminder switch connector D-16 and body ground.

If the harness wires between key reminder switch connector D-16 and body ground are damaged, repair them. Go to Step 6.

If the harness wires are in good condition, replace the ETACS-ECU or tone alarm-ECU. Check that the malfunction is eliminated.

Symptom Related Diagnostic Procedures|Page 599 > < Symptom Related Diagnostic Procedures|Page 597