Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Tightening torque: 37 Nm (27 ft. lbs.)
>F< Pitman Arm Installation
Install the pitman arm to the gear box with the mating marks aligned.
INSPECTION
Dust Cover Replacement
When the dust cover is damaged accidentally during service work, replace the dust cover only as follows:
1. Fill inside the dust cover with multipurpose grease.
2. Apply the 3M(TM) AAD Part number 8661 or equivalent to the mounting surface of the dust cover at the pitman arm.
3. Using special tool MB990776, install the dust cover to the pitman arm.
4. Press the dust cover with a finger to check whether the dust cover is cracked or damaged.