Montero Sport LTD 2WD V6-3.5L SOHC (2000)
Shift Interlock: Symptom Related Diagnostic Procedures
Inspection Procedure 1
INSPECTION PROCEDURE 1
Selector lever can be moved from "P" to "R" without depressing brake pedal when ignition key is at positions other than "LOCK".
TECHNICAL DESCRIPTION (COMMENT)
Lock cam or shift lock cable may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of lock cam
-
Malfunction of shift lock cable
DIAGNOSIS
Check items described in the column "Troubleshooting hints." Confirm that the selector lever cannot be moved from the "P" position to the "R"
position unless the brake pedal is depressed while the ignition key is at a position other than "LOCK".
Inspection Procedure 2
INSPECTION PROCEDURE 2
Selector lever cannot be moved from "P" to "R" with brake pedal depressed when ignition key is at positions other than "LOCK".
TECHNICAL DESCRIPTION (COMMENT)
Selector lever assembly, shift lock cable, key interlock cable, transmission control cable or lock cam may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of selector lever assembly
-
Malfunction of shift lock cable
-
Malfunction of key interlock cable
-
Malfunction of transmission control cable
-
Malfunction of lock cam
DIAGNOSIS
Check items described in the column "Troubleshooting hints." Confirm that the selector lever can be moved from the "P" position to the "R" position
if the brake pedal is depressed while the ignition key is at a position other than "LOCK".
Inspection Procedure 3
INSPECTION PROCEDURE 3
Selector lever can be moved from "P" to "R" with brake pedal depressed when ignition key is at "LOCK" position.
TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable or lock cam may be defective.
TROUBLESHOOTING HINTS
-
Malfunction of lock cam
-
Malfunction of key interlock cable