Montero Sport LTD 4WD V6-3.5L SOHC (1999)
6. Turn the wheel by hand and check the change in braking force when the brake pedal is depressed. When using the braking force tester, depress the
brake pedal until the braking force is at the following values, and check that the braking force changes to the brake drag force inspected in step 2
when the actuator is force-driven. The result should be as shown in the diagram above. 7. If the result of inspection is abnormal, correct according
to the Diagnosis Table.
8. After inspection, disconnect the scan tool immediately after turning the ignition switch to "OFF."