mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Relays and Modules - Cruise Control > < Initial Inspection and Diagnostic Overview|Page 6459
Page 2
background image

RETURN TO THE SET SPEED BEFORE CANCELLATION AND AUTO-CRUISE CONTROL CANCELLATION

1. Set the auto-cruise speed control.
2. When any of the following operations are performed while at constant speed during auto-cruise control, check if normal driving is resumed and

deceleration occurs.
1. The auto-cruise control switch is pushed in the direction of arrow (C).
2. The brake pedal is depressed.
3. The clutch pedal is depressed. (M/T)
4. The selector lever is moved to the "N" range. (A/T)

3. At a vehicle speed of 40 kph (25 mph) or higher, check if when the "RESUME" switch is switched "ON," the vehicle speed returns to the speed

before auto-cruise control driving was cancelled, and constant speed driving occurs.

4. When the main switch is turned to "OFF" while driving at constant speed, check if normal driving is resumed and deceleration occurs.

Relays and Modules - Cruise Control > < Initial Inspection and Diagnostic Overview|Page 6459