Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Cruise Control Switch: Adjustments
AUTO-CRUISE CONTROL SETTING
1. Switch "ON" the main switch.
2. Drive at the desired speed, above approximately 40 kph. (25 mph)
3. Push the auto-cruise control switch in the direction of arrow (B).
4. Check to be sure that when the switch is released the speed is the desired constant speed.
NOTE: If the vehicles speed decreases to approximately 15kph (9mph) below the set speed because of climbing a hill for example, the
auto-cruise control will be cancelled.
SPEED-INCREASE SETTING
1. Set to the desired speed.
2. Push the auto-cruise control switch in the direction of arrow (A).
3. Check to be sure that acceleration continues while the switch is held, and that after it is released the constant speed at the time when it was released
becomes the driving speed.
NOTE: Acceleration can be continued even if the vehicle speed has passed the high-speed limit [approximately 200 kph (124 mph)]. But the
speed when the auto-cruise control switch is released will be recorded as the high-speed limit.
SPEED-REDUCTION SETTING
1. Set to the desired speed.
2. Push the auto-cruise control switch in the direction of arrow (B).
3. Check to be sure that deceleration continues while the switch is pressed, and that after it is released the constant speed at the time when it was
released becomes the driving speed.
NOTE: When The vehicle speed reaches the low limit [approximately 40 kph (25 mph)] during deceleration, the auto-cruise control will be
cancelled.
