Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Air Conditioning Switch: Service and Repair
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>A<
HEATER CONTROL ASSEMBLY INSTALLATION
1. Follow the steps below to install the air outlet changeover damper link cable.
1. Set the air outlet changeover control knob on the heater control assembly to the defroster position.
2. Set the air outlet changeover damper link of the heater unit to the defroster position as shown in the illustration, and then connect the
cable to the link pin.
3. Push the outer cable in the direction of the arrow so that there is no looseness, and then secure it with clip.