Montero Sport LTD 4WD V6-3.5L SOHC (1999)
2. Follow the steps below to install the air mix damper lever cable.
1. Set the temperature control knob on the heater control assembly to the maximum hot position.
2. Set the air mix damper lever of the heater unit to the maximum hot position as shown in the illustration, and then connect the cable to
the lever pin.
3. Push the outer cable in the direction of the arrow so that there is no looseness, and then secure it with clip.
3. Follow the steps below to install the inside/outside air changeover damper link cable.
1. Set the inside/outside air changeover control knob on the heater control assembly to the outside air induction position.
2. Set the inside/outside air changeover damper link of the blower assembly to the outside air induction position as shown in the
illustration, and then connect the cable to the link pin.
3. Push the outer cable in the direction of the arrow so that there is no looseness, and then secure it with clip.
4. After installation, ensure that each damper operates smoothly by operating the heater control assembly knob.
