Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Fuel Gauge: Testing and Inspection
Inspection Procedure
FUEL GAUGE RESISTANCE CHECK
1. Remove the power supply tightening screw.
CAUTION: When inserting the test probe into the power supply terminal, be careful not to touch the printed board.
2. Use an ohmmeter to measure the resistance between the terminals.
Standard value:
Power supply - Ground: 192 Ohm
Power supply - Fuel gauge: 107 Ohm
Fuel gauge - Ground: 85 Ohm
3. If within the standard value, the fuel gauge is OK. If not within the standard value, replace the fuel gauge.
