Montero Sport LTD 4WD V6-3.5L SOHC (1999)
c.
If the ROM ID is as shown, or if the PCM vendor number is as specified in the PARTS INFORMATION section of this bulletin, refer to the
diagnosis instructions for DTC P0120 in Group 13 of the appropriate service manual. Do not continue with this procedure.
3.
Confirm proper TPS operation as follows:
a.
Turn the ignition key ON. On the MUT-II screen, check the MFI data list for TPS voltage. Confirm that the TPS voltage is within service
manual specifications at closed throttle and at wide open throttle. Also confirm that the voltage changes smoothly as the throttle is opened
and closed.
b.
If the TPS voltage reading is not within specification or its voltage changes erratically, refer to the diagnosis instructions for DTC P0120 in
Group 13 of the appropriate service manual.
c.
If the TPS voltage reading is within specifications and its voltage changes smoothly, go to step 4.
4.
Replace the PCM as described in the appropriate service manual. Refer to the PARTS INFORMATION listing in this bulletin.
IMPORTANT
a.
Check the replacement PCM vendor number before installing. The PCM part number not changed with the software update. The vendor
number on the PCM label reflects whether the PCM software has been updated. Verify that the PCM has the latest software by comparing
the vendor number on the PCM label with the vendor number in the chart in the PARTS INFORMATION section of this bulletin.
