mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Technician Safety Information|Page 5746 > < Refrigerant Temperature Sensor|Locations|Page 5739
Page 1
background image

Air Bag(s) Arming and Disarming: Technician Safety Information

DANGER:
In order to avoid injury to yourself or others from accidental deployment of the air bag during servicing, read and carefully follow all the
precautions and procedures described.

WARNING:

After disconnecting the battery cable, wait 60 seconds or more before proceeding with the following work.

The SRS system is designed to retain enough voltage to deploy the air bag for a short time even after the battery has been disconnected, so serious injury
may result from unintended air bag deployment if work is done on the SRS system immediately after the battery cables are disconnected.

Do not use any electrical test equipment on or near the SRS components.
Never Attempt to Repair the Following;

Components:
- Front Impact Sensor
- SRS-ECU
- Clock Spring
- Air Bag Module

If any of these components are diagnosed as faulty, they should only be replaced, in accordance with the INDIVIDUAL COMPONENT SERVICE
procedures.

Technician Safety Information|Page 5746 > < Refrigerant Temperature Sensor|Locations|Page 5739