Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Impact Sensor: Service and Repair
Sensor Cable Installation
If there is a malfunction in the front wiring harness between the front impact sensor and body wiring harness, install and route a new sensor cable.
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
1. Disconnect the negative (-) battery cable and tape the terminal to prevent accidental connection and air bag(s) deployment.
2. Make a cut in the grommet in the place shown in the illustration, and pass the sensor cable through the cut.
