Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Fit the spring to the oil pump body with the larger-diameter end at the terminal assembly side.
>D< Side Plate Installation
Line up the dowel pin hole of the side plate with the dowel pin of the pump body when installing the side plate.
>E< Rotor Installation
Install the rotor to the pulley assembly so that the rotor's punch mark is at the pump cover side.
>F< Snap Ring Installation
After installation of the snap ring, lift the rotor and check that the snap ring has entered the countersunk part.
>G< Cam Ring Installation