Montero Sport LTD 4WD V6-3.5L SOHC (1999)
Steering Wheel: Service and Repair
WARNING:
-
Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
-
Do not drop the air bag modules or clock spring or allow contact with water, grease or oil.
Replace it if a dent, crack, deformation or rust is detected.
-
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
-
Do not expose the air bag modules to temperatures over 93°C (200° F).
-
After deployment of an air bag, replace the air bag modules. Check the clock springs and if faulty, replace it with a new part
-
Wear gloves and safety goggles when handling air bags that have already deployed.
-
An undeployed air bag module should only be disposed of in accordance with the procedures.
Pre-Removal Operation
After setting the steering wheel and the front wheels to the straight ahead position, remove the ignition key.
REMOVAL
Required Special Tools:
MB990803: Steering Wheel Puller
MB991502: Scan Tool (MUT II)
MB991613: SRS Check Harness
