Montero Sport LTD 4WD V6-3.5L SOHC (1999)
1. After special tool MB990560 has been installed as shown, tighten the nut of special tool MB990560 until the portion of special tool
MB990560 touches the bearing outer race.
CAUTION: Do not allow the mainshaft to drop.
2. Press out the mainshaft from the bearing.
<B> Clutch Gear/Bearing Removal
1. Use a press and steel plate to remove the clutch gear and bearing together.
2. Use a press to hold the supports against the bearing inner race, and separate the clutch gear and bearing.
Assembly Service Points
>A< Oil Seal Installation
Use special tool MB991168 to tap the oil seal until it is flush with the clutch housing.
