Montero Sport LTD 4WD V6-3.5L SOHC (1999)
<6G74 and Vehicles With ABS>
Use special tool MB990890 or MB990891 to press-fit the bearing outer race to the bearing case.
>B< Inner Bearing Inner Race/Outer Bearing Inner Race Installation
1. Apply multipurpose grease to the roller surface and ends of the bearing.
2. Pass the axle shaft through the bearing case and the inner bearing inner race and outer bearing inner race.
CAUTION: Both the inner bearing inner race and outer bearing inner race should be press fit together.
3. Use special tool MB990799 to press-fit the inner bearing inner race and outer bearing inner race to the axle shaft.
>C< Bearing Inner Race Installation
1. Apply multipurpose grease to the roller surface and ends of the bearing.
2. Place the bearing case and the bearing inner race onto the axle shaft in that order.
3. Use special tool MB990799 to press-fit the inner bearing inner race and outer bearing inner race to the axle shaft.
>D< Oil Seal Installation
