mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Windshield - Wind Noise|Page 7151 > < Windshield - Wind Noise
Page 1
background image

Windshield: Customer Interest
Windshield - Wind Noise

No: TSB-00-42A-005

DATE: August, 2000

MODEL: See below

SUBJECT:
WINDSHIELD WIND NOISE

PURPOSE
Windshield wind (buzz, hum or whistle) noise, especially in the A-pillar area or across the top of the windshield, may occur when driving at highway
speeds. The noise may be intermittent, and typically is more evident at ambient temperatures over 90 degrees F. Apply a silicone sealant (3M 08661 or
equivalent) between the windshield moulding and body, across the top and sides of the windshield.

^

If a customer complains of a  "wind-rush" noise in the lower area of the left side A-pillar, refer to TSB-97-42A-009 for repair procedures.

^

If a customer complains of wind noise at the upper front door area, refer to TSB-99-42A-009 for door weatherstrip replacement and door adjustment
procedures.

AFFECTED VEHICLES

1997-2001 Montero Sport

PROCEDURE

1.

Apply silicone sealant 3M 08661 or equivalent between the body and the front windshield moulding as shown, at the top and sides of the
windshield.

WARRANTY INFORMATION

Apply Sealant at Windshield Moulding

Nature Code: 99D

Cause Code: 990

Labor Operation No. 51620A10

Time Allowance: 0.2 hr.

Warranty Coverage: 36 months/36,000 miles.

Special Warranty Information: Normal warranty procedures apply.

Windshield - Wind Noise|Page 7151 > < Windshield - Wind Noise