Montero Sport XLS 4WD V6-3.0L SOHC (1999)
1. Loosen the upper arm mounting bolts and nuts.
NOTE: Remove the shock absorber mounting nut and jam nut, compress the shock absorber and loosen the upper arm mounting bolts and nuts.
CAUTION:
-
Difference in shim thickness between front and rear must be 4 mm (0.6 inch) or less.
-
Do not use 4 or more shims at one location.
2. Increase or decrease shims between the upper arm shaft and crossmember to adjust the camber and caster. (Refer to Charts for Shim Increase or
Decrease.)
Charts for Shim Increase or Decrease
