Montero Sport XLS 4WD V6-3.5L SOHC (2002)
5. Turn the teeth side of the rack cable toward the front of the vehicle (90 degree angle to the right), and engage the rack cable with the motor gears.
6. Pull lightly on the rack cable. If there is no resistance and it comes out, it is not engaged with the motor gears. Check that the end of the rack gear
is not bent again, and then repeat steps (3) and (4) above again.
7. Set up the antenna pole vertically, and turn the radio off to wind in the rack cable. The antenna pole will e pulled into the motor antenna as the rack
cable is wound in.
8. After tightening the ring nut, turn the radio on and off and heck the operation of the antenna pole.
