Montero Sport XLS 4WD V6-3.5L SOHC (2002)
radiator grill toward you.
[[B]]ROOF DRIP MOLDING REMOVAL
CAUTION: If the molding has become warped, it should not be reused.
Use special tool MB990449 to lever out the molding.
[[C]]DOOR MOLDING REMOVAL
Gently lift and remove the door molding. If there is any double-sided tape remaining on the door molding, remove according to the following
instructions.
[Remove double-sided tape remaining on the body sur-face]
1. Attach protection tape all the way along the edges of the double-sided tape which is still adhering to the body.
2. Scrape off the double-sided tape with a resin spatula as possible.
3. Peel off the protection tape.
4. Use a shop towel moistened with 3M(TM) AAD Part number 8906 or equivalent to wipe the body.
[Remove double-sided tape remaining on double-sided tape (when re-using door molding)]