mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Trunk / Liftgate Handle|Testing and Inspection|Page 5731 > < Body - Squeak Noise on Bumps|Page 5727
Page 1
background image

Trunk / Liftgate Handle: Testing and Inspection

LIFTGATE HANDLE PLAY CHECK

1. Check the back boor handle play.

Standard value (B): 1.5 - 5.5 mm (0.06 - 0.22 inches)

2. If the play is not within the standard value range, check and replace the liftgate handle or the liftgate latch assembly.

Trunk / Liftgate Handle|Testing and Inspection|Page 5731 > < Body - Squeak Noise on Bumps|Page 5727