Montero Sport XLS 4WD V6-3.5L SOHC (2002)
7. Remove the setting pin that has been inserted into the auto-tensioner.
8. Turn the crankshaft two turns clockwise to align the timing marks.
9. Wait for at least five minutes, and then check that the auto-tensioner pushrod extends within the standard value.
Standard value (A): 3.8 - 5.0 mm (0.15 - 0.20 inch)
10. If no, repeat the operation in steps (5) to (9).
11. Check again that the timing marks of each sprocket are aligned.
>>C<< CRANKSHAFT PULLEY INSTALLATION
Use special tools MD998715 and MB990767 to install the crankshaft pulley.
INSPECTION
AUTO-TENSIONER
^
Check the auto-tensioner for possible leaks.
^
Check the pushrod for cracks.
