Montero Sport XLS 4WD V6-3.5L SOHC (2002)
STEP 11. Check the harness wire between key reminder switch connector D-16 and body ground.
Q: Is the resistance wore between key reminder switch D-16 and body ground?
YES: Replace the ETACS-ECU. Then Go to Step 12.
NO: Repair or replace it. Refer to Harness Connector Inspection.
STEP 12. Check the harness wire between key reminder switch connector D-16 and ETACS-ECU connector D-11.
NOTE: After checking intermediate connector C-72 and D-13, check the wires. If intermediate connector C-72 and D-13 are damaged, repair or replace
them. Refer to Harness Connector Inspection.
Q: Is the harness wire between key reminder switch D-1 6 and ETACS-ECU connector D-11 En good condition?
YES: Go to Step 13.
NO: Repair or replace it. Refer to Harness Connector Inspection.